Senville Wall Mounting Bracket for Mini Split Air Conditioner (H550)

I put 2 24 k mini splits from senville on these brackets super strong and easy to install although some shimming might be necessary behind the 90 degree brackets. I just used some half inch ply wood and the little round rubber pieces that come in the box so there's no rattle noise through the wall. Also a huge bonus to mounting on the wall is that the drain on the bottom of the out side compressor isn't so close to the ground that it freezes up during winter when you use the heater. Just make sure its pointed down and away. If you set mininsplits on the ground in winter your in trouble. Dont let your hvac guy tell you otherwise unless you want an ice ball hyper heat models or not.

I priced brackets from several big box stores that came in 3 times the cost ordering direct from Senville. This bracket is made very well and is quite easy to install, and it includes all hardware along with the bracket.

A product may performs its function properly but still be only marginally acceptable. This is one of those products. Only two bolts of the eight provided were of the proper length. The instruction were almost useless. The steel bracket is coated with what I assume is some sort of baked on ceramic but there were chips on the edges which I'll have to touch up with Rustoleum to avoid rusting. While installing the bracket on the wall of my garage a large patch of the coating flaked off even though it was not subjected to pressure or rough handling. I had to use a punch on ALL of the threaded perforations on the bracket to allow bolts to pass through them. So, why did I keep it and not send it back? Because it took so damned long to arrive I didn't have weeks to wait for another. It will serve its purpose but I expected better quality. I wouldn't have written a review but I received an email from the vendors asking for my opinion. Here it is: I'm not impressed. Would I recommend it? Depends on your options.

I have 2 big outside heat pumps, 30000 BTU, weight 165 lbs. I installed 2 brackets. On the one side I have siding and the other concrete. These brackets hold them up great.About my order. I was missing a part. The people from SoGoodToBuy did an AWSOME job working with me to get my missing part to me. They are very responsive when contacting them by email.Thanks SoGoodToBuy, you did great.

I used this to install my Senville Leto 18000 BTU mini split. It's very sturdy, and about what you would expect. I have two minor complaints:- The installation instructions were cryptic to the point of being useless.. they might as well have been written in hieroglyphics. I actually did better assembling it by looking at pictures of the completely assembled one on amazon and working out the details from there.- I wish there were some 'depth' options available.. the one-size-fits-all approach is great and all, but in my case I ended up with like 8" of steel hanging out past my outdoor unit just waiting for somebody to smack their head on it. I ended up using my sawzall to trim it down to a reasonable length, and then painting the cut ends with a matching almond enamel spray paint I got from lowes.

will install this along with mini split system in spring , I opened the box and looked the parts over , all looks good very sturdy looking and I don't anticipate any problems . Update : After 1 year , all the paint has lifted off and bracket is completely rusting . Don't know what I could have done different , whatever this bracket was painted with was supposed to be good and it did look good . Back to the drawing board and now I don't trust any of the alternative brands . This will be a major pain in the neck supporting the AC unit while trying to change out the bracket .

The product does the intended job nicely, but the instructions/parts list are lacking on info.

It was an easy install and product is sturdy.

This A/C mounting bracket is well-made, strong and easy to assemble. I did get a few parts that weren’t listed in the instructions and one bolt stripped when I tightened it. Fortunately the bolts and nuts are standard National Course and not metric so finding a replacement was easy. Overall I would recommend this product.

Used this bracket with a senville unit. Worked great.I ended up using larger rubber spacers for the feet, so I had to get longer bolts.

We use it to support the AC unit of outlet mini split in our Quebec cottage. It’s cold and snowy there. After the winter it’s still good and new. Good sturdy product.

Bonne qualité de support mais malheureusement dois retourner car n'est pas assez profond pour un Mini-split mural de marque Tosot Gree Lomo+ 18000 Btu. Ne peut respecter le dégagement recommandé entre l'unité et le mur. 2" seulement au lieu de 6". De plus boîte endommagée avec pièces manquantes à la livraison.

the bracket is universal to fit all units,very little problem to install and align,but leave plenty or room below the bracket to install the fasteners when the condenser is mounted.